Frequently Asked Questions
About Us
01.20.09 has been about positive change from the day we launched BushsLastDay.com. We finally have a candidate who believes in, and will work for, that positive change. Join us in supporting him!
Where do I mail returns or exchanges to?
To return or exchange any item, please mail to:- Via US Postal Service:
- BLD Designs, Inc
PO Box 44
Manchester, VT 05254 - Via UPS/Fed Ex:
- BLD Designs Inc
250A Manchester Valley Road
Manchester Center VT 05255
What is the phone number to call if I have a problem or question about my order?
- Call us toll-free at 1-800-749-7939
How do I re-set my Obama's First Day Countdown Clock key chain/magnet?
- First, look at the back of your clock and notice the three buttons on the back (M1, SET, M2). Now, turn it over and hold the clock so that you are looking at the front/face of it. From this perspective, the M1 button will be the left most button, SET will be the middle button and M2 will be the button on the right.
- Press the SET button on the back of the clock (the middle button). This will bring up what should be/will be the current date (Month, Day & Year). Immediately after pressing SET, press the M1 button (to the left of the SET button). The numbers for the current year will begin to flash. Press the SET button as many times as needed to change the number to the current year. When done, press the M1 button again.
- The month will now begin to flash. Press the SET button until the display shows the current month, and then press M1 again.
- The day of the month is now flashing. Press SET until you are at the current day. Press M1 again.
- You are now at the current time screen. The hours will now be flashing.
- Press SET to advance to the correct hour, then press M1.
- The minutes will now be flashing. Press SET to advance the minutes.
- Again, press the M1 button. Now hit the SET button to make the time AM or PM (represented by either a P or an A in the upper right corner).
- Press M1 again.
- Press SET to advance to the correct hour, then press M1.
To Set the Current Time & Date:
- Again, hold the clock so that you are looking at the face/front of it. Press the M2 button (the farthest right button).
- Immediately after pressing M2, Press the SET button. The number for the year will begin to flash. Press SET to advance to the target "year" of 2009 or 2008. Then press M2.
- The number for the Month will now be flashing. Press SET to change to the target month (January or November) and then press M2 again.
- The number for the date will now be flashing. Press SET to advance the date to the target date (20th or the 4th). Press M2.
To Set your Obama's First Day Countdown Clock key chain/magnet for
January 20, 2009
January 20, 2009
- Clock battery should last 2 years. Replace with Button Cell (L1121, AG8 or Radio Shack #391) battery.
- The battery is easily replaced if required by opening the slide out battery compartment located at the bottom of the clock.
Battery


